{
  "id": "adxl362",
  "name": "ADXL362 ultra-low-power accelerometer (SPI)",
  "category": "sensor",
  "measures": [
    "acceleration",
    "motion"
  ],
  "pins": [
    {
      "name": "VCC",
      "role": "power",
      "notes": "Use 3V3. Pin order differs between breakouts: check the silkscreen"
    },
    {
      "name": "GND",
      "role": "ground"
    },
    {
      "name": "CS",
      "role": "spi_cs"
    },
    {
      "name": "SCLK",
      "role": "spi_sck"
    },
    {
      "name": "MOSI",
      "role": "spi_mosi",
      "notes": "Marked SDI on some boards"
    },
    {
      "name": "MISO",
      "role": "spi_miso",
      "notes": "Marked SDO on some boards"
    },
    {
      "name": "INT1",
      "role": "int",
      "notes": "Interrupt output, optional"
    },
    {
      "name": "INT2",
      "role": "int",
      "notes": "Interrupt output, optional"
    }
  ],
  "bus": "spi",
  "voltage": "3.3",
  "model": {
    "shape": "breakout",
    "size": [
      22,
      18,
      1.6
    ],
    "color": "#1F4FA8"
  },
  "keywords": [
    "adxl362",
    "analog devices",
    "accelerometer",
    "spi",
    "low power",
    "wake up",
    "accelerometro"
  ],
  "sources": [
    {
      "title": "Analog Devices ADXL362 datasheet",
      "section": "SPI only; register 0x00 DEVID_AD reads 0xAD (read command 0x0B)"
    },
    {
      "title": "Analog Devices ADXL362 datasheet",
      "section": "Supply 1.6 to 3.5 V"
    }
  ]
}