{
  "id": "am2320",
  "name": "AM2320 temperature + humidity",
  "category": "sensor",
  "measures": [
    "temperature",
    "humidity"
  ],
  "pins": [
    {
      "name": "VDD",
      "role": "power",
      "notes": "Pin 1 (left, grille facing you)"
    },
    {
      "name": "SDA",
      "role": "i2c_sda",
      "notes": "Needs a pull-up to 3.3 V (about 4.7 kΩ)"
    },
    {
      "name": "GND",
      "role": "ground"
    },
    {
      "name": "SCL",
      "role": "i2c_scl",
      "notes": "Needs a pull-up to 3.3 V (about 4.7 kΩ). Tie SCL to GND at power-up to use the one-wire mode instead"
    }
  ],
  "bus": "i2c",
  "addresses": [
    "0x5C"
  ],
  "voltage": "3.3-5",
  "model": {
    "shape": "dht",
    "size": [
      12.5,
      22,
      7
    ],
    "color": "#F2F2F2"
  },
  "keywords": [
    "am2320",
    "aosong",
    "humidity",
    "temperature",
    "umidità",
    "temperatura"
  ],
  "sources": [
    {
      "title": "Aosong AM2320 datasheet",
      "section": "Pin 1 VDD, 2 SDA, 3 GND, 4 SCL; supply 3.1 to 5.5 V"
    },
    {
      "title": "Aosong AM2320 datasheet",
      "section": "I2C address 0xB8 (8-bit) = 0x5C; sleeps between reads and must be woken first, so a plain scan can miss it"
    }
  ]
}