{
  "id": "bmp280-gy",
  "name": "GY-BMP280 pressure + temperature",
  "category": "sensor",
  "measures": [
    "temperature",
    "pressure"
  ],
  "pins": [
    {
      "name": "VCC",
      "role": "power"
    },
    {
      "name": "GND",
      "role": "ground"
    },
    {
      "name": "SCL",
      "role": "i2c_scl"
    },
    {
      "name": "SDA",
      "role": "i2c_sda"
    },
    {
      "name": "CSB",
      "role": "passive",
      "notes": "Chip select. Leave unconnected (pulled HIGH on the board) to use I2C"
    },
    {
      "name": "SDO",
      "role": "passive",
      "notes": "Address select: LOW = 0x76, HIGH = 0x77. Most boards default to 0x76"
    }
  ],
  "bus": "i2c",
  "addresses": [
    "0x76",
    "0x77"
  ],
  "idCheck": {
    "register": "0xD0",
    "expect": "0x58",
    "otherValues": {
      "0x60": "This is a BME280: it also measures humidity."
    }
  },
  "voltage": "3.3",
  "pullupsOnBoard": true,
  "model": {
    "shape": "breakout",
    "size": [
      16.2,
      15,
      1.6
    ],
    "color": "#5B2A86"
  },
  "keywords": [
    "bmp280",
    "gy-bmp280",
    "barometer",
    "pressure",
    "temperature",
    "bosch",
    "pressione",
    "barometro"
  ],
  "sources": [
    {
      "title": "Bosch BMP280 datasheet",
      "section": "Register 0xD0 id (reads 0x58)"
    },
    {
      "title": "Bosch BMP280 datasheet",
      "section": "I2C interface: address 0x76 when SDO = GND, 0x77 when SDO = VDDIO"
    }
  ]
}