{
  "id": "lm75a",
  "name": "LM75A temperature (CJMCU-75)",
  "category": "sensor",
  "measures": [
    "temperature"
  ],
  "pins": [
    {
      "name": "VCC",
      "role": "power",
      "notes": "Use 3V3 so the I2C lines stay at 3.3 V"
    },
    {
      "name": "GND",
      "role": "ground"
    },
    {
      "name": "SDA",
      "role": "i2c_sda"
    },
    {
      "name": "SCL",
      "role": "i2c_scl"
    },
    {
      "name": "OS",
      "role": "int",
      "notes": "Over-temperature output (open drain), optional"
    },
    {
      "name": "A0",
      "role": "passive",
      "notes": "Address bit 0. Check the board: some leave A0 to A2 floating"
    },
    {
      "name": "A1",
      "role": "passive",
      "notes": "Address bit 1"
    },
    {
      "name": "A2",
      "role": "passive",
      "notes": "Address bit 2"
    }
  ],
  "bus": "i2c",
  "addresses": [
    "0x48",
    "0x49",
    "0x4A",
    "0x4B",
    "0x4C",
    "0x4D",
    "0x4E",
    "0x4F"
  ],
  "voltage": "3.3-5",
  "model": {
    "shape": "breakout",
    "size": [
      21.4,
      14,
      1.6
    ],
    "color": "#5B2A86"
  },
  "keywords": [
    "lm75a",
    "lm75",
    "cjmcu-75",
    "nxp",
    "temperature",
    "temperatura"
  ],
  "sources": [
    {
      "title": "NXP LM75A datasheet",
      "section": "Slave address 1001 A2 A1 A0 = 0x48 to 0x4F; supply 2.8 to 5.5 V"
    },
    {
      "title": "NXP LM75A datasheet",
      "section": "No ID register; the pin order here is one common board layout"
    }
  ]
}