{
  "id": "rfm95w-lora",
  "name": "RFM95W LoRa breakout (SX1276, 868/915 MHz)",
  "category": "output",
  "pins": [
    {
      "name": "VIN",
      "role": "power",
      "notes": "On-board regulator: 3.3 to 6 V"
    },
    {
      "name": "GND",
      "role": "ground"
    },
    {
      "name": "EN",
      "role": "passive",
      "notes": "Regulator enable, pulled up. Leave unconnected"
    },
    {
      "name": "G0",
      "role": "int",
      "notes": "DIO0: TX done / RX done interrupt"
    },
    {
      "name": "SCK",
      "role": "spi_sck"
    },
    {
      "name": "MISO",
      "role": "spi_miso"
    },
    {
      "name": "MOSI",
      "role": "spi_mosi"
    },
    {
      "name": "CS",
      "role": "spi_cs",
      "notes": "SPI chip select (NSS)"
    },
    {
      "name": "RST",
      "role": "digital_in",
      "needsOutput": true,
      "notes": "Reset, active LOW"
    },
    {
      "name": "G1",
      "role": "int",
      "notes": "DIO1, optional"
    },
    {
      "name": "G2",
      "role": "passive",
      "notes": "DIO2, usually unused"
    },
    {
      "name": "G3",
      "role": "passive"
    },
    {
      "name": "G4",
      "role": "passive"
    },
    {
      "name": "G5",
      "role": "passive"
    },
    {
      "name": "ANT",
      "role": "passive",
      "notes": "Antenna pad. Always connect an antenna before transmitting"
    }
  ],
  "bus": "spi",
  "voltage": "3.3-5",
  "model": {
    "shape": "module",
    "size": [
      39.1,
      25,
      4
    ],
    "color": "#1A1A1A"
  },
  "keywords": [
    "rfm95w",
    "rfm95",
    "sx1276",
    "lora",
    "868 mhz",
    "915 mhz",
    "lorawan",
    "long range",
    "radio"
  ],
  "sources": [
    {
      "title": "Semtech SX1276/77/78/79 datasheet",
      "section": "SPI interface; DIO0 to DIO5 mapping; supply 1.8 to 3.7 V"
    },
    {
      "title": "Adafruit RFM69HCW and RFM9X LoRa Packet Radio Breakouts guide",
      "section": "Pinouts (VIN, GND, EN, G0 to G5, SCK, MISO, MOSI, CS, RST)"
    }
  ]
}