HT16K33 4-digit 7-segment backpack (I2C) con ESP32

Alimentazione 3.3-5 V Bus I2C Indirizzo I2C 0x70 / 0x71 / 0x72 / 0x73 / 0x74 / 0x75 / 0x76 / 0x77

Pin e collegamento all’ESP32

Pin	Ruolo	Pin ESP32	Note
+	Alimentazione	3V3	Pin order varies between boards: match by the printed label. HT16K33 is rated 4.5 to 5.5 V. At 3V3 it usually works, dimmer
-	Massa	GND
D	Dati I2C (SDA)	D21	I2C data (SDA)
C	Clock I2C (SCL)	D22	I2C clock (SCL)

Collegamento consigliato per l’ESP32 DevKit a 30 pin, evitando i pin della flash, di sola lettura e di strapping. BoardPilot lo controlla mentre colleghi.

Codice di partenza (Arduino)

#include <Wire.h>

void setup() {
  Serial.begin(115200);
  Wire.begin(21, 22);  // SDA = GPIO 21, SCL = GPIO 22
  Wire.beginTransmission(0x70);
  bool found = Wire.endTransmission() == 0;
  Serial.println(found ? "HT16K33 4-digit 7-segment backpack (I2C) found at 0x70" : "Not found: check power, GND and SDA/SCL");
}

void loop() {}

Fonti

Holtek HT16K33 datasheet, Slave address 1110 A2 A1 A0; VDD 4.5 to 5.5 V
Adafruit LED Backpacks guide, 0.56" 7-segment backpack pinouts, address jumpers A0 to A2

Provalo in 3D in BoardPilot

BoardPilot Dati del componente (JSON)

Componenti simili

HT16K33 8x8 LED matrix backpack (I2C)LCD 16x2 with I2C backpackLCD 20x4 with I2C backpackSH1106 OLED 1.3" 128x64 (I2C)SSD1306 OLED 0.91" 128x32 (I2C)SSD1306 OLED 128x64 (I2C)

Dati dei componenti: CC BY 4.0, riutilizzabili citando BoardPilot.