DS18B20 with ESP32-S3-DevKitC-1
Wiring for the DS18B20 waterproof temperature probe on the ESP32-S3-DevKitC-1 (ESP32-S3, 3.3 V logic), chosen with the same pin rules BoardPilot uses: default buses first, and no pins that are used for flash, USB, the debugger or booting.
Wiring
| DS18B20 pin | Role | ESP32-S3-DevKitC-1 pin | Notes |
|---|---|---|---|
| VDD | Power | 3V3 | Red wire |
| DQ | One-wire data | 4 | Yellow (sometimes white) wire. Needs a 4.7 kΩ pull-up to 3.3 V |
| GND | Ground | G | Black wire |
Check before you power it on
- Supply: 3.3 V from the 3V3 pin.
Test code (Arduino)
// Library: OneWire, DallasTemperature
#include <OneWire.h>
#include <DallasTemperature.h>
OneWire bus(4); // needs a 4.7 kΩ pull-up from DQ to VDD
DallasTemperature sensors(&bus);
void setup() {
Serial.begin(115200);
sensors.begin();
Serial.print("Sensors found: ");
Serial.println(sensors.getDeviceCount());
}
void loop() {
sensors.requestTemperatures();
Serial.println(sensors.getTempCByIndex(0));
delay(1000);
}
Arduino board: esp32:esp32:esp32s3. Use the port labelled UART. If uploading does not start, hold BOOT, press and release RESET, then release BOOT.
Questions
Which ESP32-S3-DevKitC-1 pins do I use for the DS18B20?
VDD → 3V3, DQ → 4, GND → G.
Does the DS18B20 work with the ESP32-S3-DevKitC-1 at 3.3 V?
Yes: the DS18B20 runs at 3.3-5 V and the ESP32-S3-DevKitC-1 uses 3.3 V signals, so no level shifting is needed.
BoardPilot checks this wiring in 3D as you build it, and finds crossed or missing wires on the real board.
Download BoardPilotFull ESP32-S3-DevKitC-1 pinout · DS18B20 waterproof temperature probe: all pins and data
The DS18B20 on other boards
ESP32 DevKit Arduino Mega 2560 R3 Arduino Nano Arduino Uno R3 WeAct Black Pill STM32F411CE ESP32-C3-DevKitM-1 Nordic nRF52840 DK NUCLEO-F401RE Raspberry Pi Pico 2 Raspberry Pi Pico W Raspberry Pi Pico Teensy 4.1
Other parts on the ESP32-S3-DevKitC-1
BME280 BMP280 DHT22 DHT11 HC-SR04 SSD1306 OLED MPU6050 WS2812B LED strip SG90 servo Relay module HC-SR501 PIR LCD 1602 I2C INA219 VL53L0X BH1750 MAX30102 RC522 RFID NEO-6M GPS Capacitive soil moisture sensor ADS1115 TM1637 28BYJ-48 stepper L298N Potentiometer Push button LED Joystick module SD card module AHT20