DHT11 with NUCLEO-F401RE

Wiring for the DHT11 temperature + humidity on the NUCLEO-F401RE (STM32F401RE, 3.3 V logic), chosen with the same pin rules BoardPilot uses: default buses first, and no pins that are used for flash, USB, the debugger or booting.

Wiring

DHT11 pin	Role	NUCLEO-F401RE pin	Notes
VCC	Power	3V3
DATA	One-wire data	D2 (PA10)	Needs a 10 kΩ pull-up (already on 3-pin modules; 3-pin module order varies, read the labels)
NC	Not wired to the board	not connected	Not connected
GND	Ground	GND

Check before you power it on

Supply: 3.3 V from the 3V3 pin.

Test code (Arduino)

// Library: DHT sensor library (Adafruit)
#include <DHT.h>

DHT dht(PA10, DHT11);

void setup() {
  Serial.begin(115200);
  dht.begin();
}

void loop() {
  delay(2000);
  Serial.print(dht.readTemperature());
  Serial.print(" C  ");
  Serial.print(dht.readHumidity());
  Serial.println(" %");
}

Arduino board: STMicroelectronics:stm32:Nucleo_64:pnum=NUCLEO_F401RE. Plug the USB cable into the mini-USB port on the ST-LINK end. No button press is needed.

Questions

Which NUCLEO-F401RE pins do I use for the DHT11?

VCC → 3V3, DATA → D2 (PA10), GND → GND.

Does the DHT11 work with the NUCLEO-F401RE at 3.3 V?

Yes: the DHT11 runs at 3.3-5 V and the NUCLEO-F401RE uses 3.3 V signals, so no level shifting is needed.

BoardPilot checks this wiring in 3D as you build it, and finds crossed or missing wires on the real board.

Download BoardPilot

Full NUCLEO-F401RE pinout · DHT11 temperature + humidity: all pins and data

The DHT11 on other boards

ESP32 DevKit Arduino Mega 2560 R3 Arduino Nano Arduino Uno R3 WeAct Black Pill STM32F411CE ESP32-C3-DevKitM-1 ESP32-S3-DevKitC-1 Nordic nRF52840 DK Raspberry Pi Pico 2 Raspberry Pi Pico W Raspberry Pi Pico Teensy 4.1

Other parts on the NUCLEO-F401RE

BME280 BMP280 DHT22 HC-SR04 SSD1306 OLED MPU6050 DS18B20 WS2812B LED strip SG90 servo Relay module HC-SR501 PIR LCD 1602 I2C INA219 VL53L0X BH1750 MAX30102 RC522 RFID NEO-6M GPS Capacitive soil moisture sensor ADS1115 TM1637 28BYJ-48 stepper L298N Potentiometer Push button LED Joystick module SD card module AHT20