BoardPilotADXL362 ultra-low-power accelerometer (SPI) con ESP32
Alimentazione 3.3 V
Bus SPI
Misura accelerazione, movimento
Pin e collegamento all’ESP32
| Pin | Ruolo | Pin ESP32 | Note |
|---|---|---|---|
| VCC | Alimentazione | 3V3 | Use 3V3. Pin order differs between breakouts: check the silkscreen |
| GND | Massa | GND | |
| CS | Chip select SPI | D5 | |
| SCLK | Clock SPI | D18 | |
| MOSI | SPI MOSI | D23 | Marked SDI on some boards |
| MISO | SPI MISO | D19 | Marked SDO on some boards |
| INT1 | Interrupt | D35 | Interrupt output, optional |
| INT2 | Interrupt | VP | Interrupt output, optional |
Collegamento consigliato per l’ESP32 DevKit a 30 pin, evitando i pin della flash, di sola lettura e di strapping. BoardPilot lo controlla mentre colleghi.
Fonti
- Analog Devices ADXL362 datasheet, SPI only; register 0x00 DEVID_AD reads 0xAD (read command 0x0B)
- Analog Devices ADXL362 datasheet, Supply 1.6 to 3.5 V
Provalo in 3D in BoardPilot
Componenti simili
ArduCAM Mini 2MP camera (OV2640, SPI)AS5048A magnetic angle encoder (SPI)MAX31855 K-type thermocouple breakoutMAX31856 universal thermocouple amplifierMAX31865 PT100/PT1000 RTD amplifierMAX6675 K-type thermocouple module
Dati dei componenti: CC BY 4.0, riutilizzabili citando BoardPilot.