BoardPilotTM1638 LED & KEY board with ESP32
Supply 3.3-5 V
Bus GPIO
Pins and ESP32 wiring
| Pin | Role | ESP32 pin | Notes |
|---|---|---|---|
| VCC | Power | 3V3 | |
| GND | Ground | GND | |
| STB | Input (the ESP32 drives it) | D25 | Strobe |
| CLK | Input (the ESP32 drives it) | D26 | Clock |
| DIO | Input (the ESP32 drives it) | D27 | Data |
Suggested wiring for the 30-pin ESP32 DevKit, avoiding flash, input-only and strapping pins. BoardPilot checks it for you as you wire.
Sources
- Titan Micro TM1638 datasheet, Serial interface STB, CLK, DIO
Try it in 3D in BoardPilot
Related parts
7-segment 4 digits 0.56" common cathode (12 pins)7-segment digit 0.56" common anode7-segment digit 0.56" common cathodeLCD 16x2 (parallel, 16 pins)LED bar graph 10 segmentsNeoPixel Stick 8 LEDs
Part data: CC BY 4.0, free to reuse with credit to BoardPilot.