SG90 servo with Arduino Nano

Wiring for the SG90 micro servo on the Arduino Nano (ATmega328P, 5 V logic), chosen with the same pin rules BoardPilot uses: default buses first, and no pins that are used for flash, USB, the debugger or booting.

Wiring

SG90 servo pin	Role	Arduino Nano pin	Notes
GND	Ground	GND	Brown wire
VCC	Power	5V
SIG	Input to the part	D2 (PD2)	Orange wire. 50 Hz PWM, 0.5 to 2.4 ms pulses

Check before you power it on

Supply: 5 V from the 5V pin.
Motors, servos, relays and LED strips can draw more current than the Arduino Nano’s pins or USB can give. Power them separately and connect the grounds together.

Test code (Arduino)

// Library: Servo
#include <Servo.h>

Servo servo;

void setup() {
  servo.attach(2);
}

void loop() {
  servo.write(0);
  delay(1000);
  servo.write(90);
  delay(1000);
  servo.write(180);
  delay(1000);
}

Arduino board: arduino:avr:nano. Clones with the old bootloader upload at 57600 baud: choose “ATmega328P (Old Bootloader)” if uploads fail.

Questions

Which Arduino Nano pins do I use for the SG90 servo?

GND → GND, VCC → 5V, SIG → D2 (PD2).

Does the SG90 servo work with the Arduino Nano at 5 V?

Yes: the SG90 servo runs at 5 V and the Arduino Nano uses 5 V signals, so no level shifting is needed.

BoardPilot checks this wiring in 3D as you build it, and finds crossed or missing wires on the real board.

Download BoardPilot

Full Arduino Nano pinout · SG90 micro servo: all pins and data

The SG90 servo on other boards

ESP32 DevKit Arduino Mega 2560 R3 Arduino Uno R3 WeAct Black Pill STM32F411CE ESP32-C3-DevKitM-1 ESP32-S3-DevKitC-1 Nordic nRF52840 DK NUCLEO-F401RE Raspberry Pi Pico 2 Raspberry Pi Pico W Raspberry Pi Pico Teensy 4.1

Other parts on the Arduino Nano

BME280 BMP280 DHT22 DHT11 HC-SR04 SSD1306 OLED MPU6050 DS18B20 WS2812B LED strip Relay module HC-SR501 PIR LCD 1602 I2C INA219 VL53L0X BH1750 MAX30102 RC522 RFID NEO-6M GPS Capacitive soil moisture sensor ADS1115 TM1637 28BYJ-48 stepper L298N Potentiometer Push button LED Joystick module SD card module AHT20